Day of The Dead Textured Fusing Tile

Use the texture tile as you would a kiln shelf tile under glass in a kiln during fusing to create a textured surface.  Frit may also be fused on the texture tile to create a dramatic pattern.  For best results, follow the glass separator or kiln wash manufacturer's instructions for applying and curing a glass separator or kiln wash to the texture tile.

DT37 Day of the Dead Texture

Mold Size: 10" L x 10" W
Diagonal Size: 14" L

Refer to the table below for a suggested Full Fuse schedule for a double layer of COE96 glass with frit:

*If using COE90, adjust this temperature to 900