Use the texture tile as you would a kiln shelf tile under glass in a kiln during fusing to create a textured surface. Frit may also be fused on the texture tile to create a dramatic pattern. For best results, follow the glass separator or kiln wash manufacturer's instructions for applying and curing a glass separator or kiln wash to the texture tile.
DT25 Green Man Texture
Mold Size: 12" L x 12" W
Diagonal Size: 17" L
Refer to the table below for a suggested Full Fuse schedule for a single layer of COE96 glass:
| Segment |
Rate |
Temp (F) |
Hold |
| 1 |
200 |
1215 |
45 |
| 2 |
50 |
1250 |
30 |
| 3 |
250 |
1330 |
10 |
| 4 |
300 |
1465 |
10 |
| 5 |
9999 |
950* |
90 |
| 6 |
100 |
500 |
10 |
*If using COE90, adjust this temperature to 900