The Holey Teardrops Cast-A-Cab mold is used with the Mini Scrap Master mold to create two 2" holey teardrop shaped pot melt cabochons. These are a great way to use up even the smallest bits of fusible scrap. Fill the pot with 42 grams of glass (its recommended to use at least 25 grams of clear) and place on top of prepared mold and fire.
LF128 Holey Tear Drops (2)
Mold Size: 5.5" L x 3.25" W
Casting Size: 2.5" L x 1.75" W each
Fill Weight: 32 grams per cavity
Refer to the table below for a suggested Full Fuse schedule for COE96 glass:
| Segment |
Rate |
Temp (F) |
Hold |
| 1 |
300 |
1150 |
45 |
| 2 |
150 |
1300 |
20 |
| 3 |
400 |
1460 |
10 |
| 4 |
9999 |
950* |
60 |
*If using COE90, adjust this temperature to 900
Refer to the table below for a suggested Tack Fire schedule for COE96 glass:
(If fusing to a Tack Fire, we recommend using Powder and Fine frit, and filling uniformly 1/4" full)
| Segment |
Rate |
Temp (F) |
Hold |
| 1 |
300 |
1150 |
45 |
| 2 |
150 |
1300 |
20 |
| 3 |
400 |
1410 |
10 |
| 4 |
9999 |
950* |
60 |
*If using COE90, adjust this temperature to 900