The Holey Peace Trio mold from Creative Paradise casts three round pieces, each with a hole through the center, in a single firing. One large piece measures 2.5 inches in diameter and two smaller pieces each measure 1.25 inches in diameter, giving you a coordinated set of three holey castings in one kiln run.
The mold footprint is 4.75 inches by 4 inches. Creative Paradise lists a fill weight of 26 grams for the large cavity and 6 grams for each small cavity. Like all ceramic casting molds, this one is COE agnostic, so the same mold works with any fusible glass. Fill the cavities with frit, small billets, or stacked sheet scrap and fuse to shape. The mold is reusable across many firings when prepped and maintained properly.
What does the Holey Peace Trio mold make? It casts three round pieces with holes through the center in one firing: one large piece at 2.5 inches in diameter and two smaller pieces at 1.25 inches in diameter each. The pieces work well as pendant blanks, coordinated earring sets with a larger focal, and decorative accents.
What COE glass can I use in this mold? Any COE. Ceramic casting molds are COE agnostic, so the same mold works with COE96, COE90, or other fusible glass. Match your firing schedule to the glass you are using.
How much glass do I need per cavity? Creative Paradise lists about 26 grams for the large cavity and 6 grams for each small cavity. Weigh your glass and test a first run when the result matters, since fill weight can vary.
How do I prep the mold before casting? Coat the cavities with a boron nitride spray (for example ZYP) and let it dry completely before adding glass. Re coat as needed between firings.
Specifications
SKU: 162479
Manufacturer: Creative Paradise (CPI.LF77)
Makes: 3 pieces (1 large, 2 small)
Finished piece size: Large 2.5 inch diameter, Small 1.25 inch diameter each
Mold size: 4.75 inches L x 4 inches W
Suggested fill weight: 26 grams (large cavity), 6 grams each (small cavities)
Material: ceramic kiln casting mold, reusable
Glass: any COE (COE agnostic)
Working Notes
These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a casting schedule suited to your glass and kiln.
Prime all three cavities with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer , and let it dry completely before adding glass so the glass does not stick.
Fill with frit, small billets, or stacked sheet scrap. For a tack fired surface, the manufacturer suggests powder and fine frit filled uniformly to about a quarter inch.
The mold is COE agnostic. Use a full fuse schedule matched to your glass, adjusting the final anneal soak for your COE.
Let the kiln cool fully before removing the cast pieces. Re coat the mold with primer as needed between firings.
The Slide Hi Temp brand separator is not recommended with these molds.
Creative Paradise Suggested Firing Schedule
This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.
Full Fuse (COE96):
Segment Rate Temp (F) Hold 1 300 1150 45 2 150 1300 20 3 400 1460 10 4 9999 950* 60
Tack Fire (COE96): for a tack fired surface, fill uniformly to about a quarter inch with powder and fine frit.
Segment Rate Temp (F) Hold 1 300 1150 45 2 150 1300 20 3 400 1410 10 4 9999 950* 60
*Segment 4 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.
Helpful downloads: Holey Mold Tutorial (PDF) · Fill Weights for Casting Molds (PDF) · Casting Mold Tips (PDF)
Description updated: July 6, 2026
Spot an error or have feedback on this description? Report it here .