Kilns are not kept in stock. They are built to order and are drop shipped from the manufacturer. You will be contacted with estimated shipping quotes as well as lead times once the order is finalized with the manufacturer.
Model - Square 186GFETLC - 120 volt, inside dimensions: 18" x 18" wide x 6 " deep, fires to 1700° F
Two kilns in one! The Square 186GFETLC is the largest top loading and clamshell loading kiln that runs on 120 volts! You get the standard top loading model plus the clamshell loading which makes flash venting, glass raking and loading shelves with glass positioned easy and convenient. Glass firing kilns are used for fusing and forming of glass shapes, precious metal clay and heat-treating. 120 volt glass fusing and precious metal clay models are equipped with a lid element for the fusing segment of the glass firing and a body element for the ramping up and down and annealing segments of the firing. A selector switch is on the electrical box to designate either the lid or body element to heat during the firing. Only one of the elements can be used at a time because of the limited power of 120 volts. If the selector switch remains in the neutral position, neither element will heat. Models come equipped with pilot light, 18” tall metal stand, stainless steel jacket, and Bartlett Instruments 3 Key electronic controller. Data is entered by scrolling through the up and down arrows for the desired ramp/hold programming.
Model comes with attached tall stand, peephole plug, lid wedge, instruction manual, and warranty card. Two-year warranty.
Upgrade to the 12 key digital RTC-1000 controller for more ramp-hold user programs and multiple features including delay start, preheat, skip step and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, and for viewing the current segment the firing is in. Other options include the lid lift assist, which makes it easy to open and close heavy kiln lids, bead door, quartz glass viewing window, Type S thermocouple, vent and much more!
Furniture Kits for 120 volt glass fusing and PMC kilns include 2 layers of shelving for stacking ware, assorted square posts, ceramic paper and a one pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts in the quantities required.
Help 
