The Peacock Textured Fusing Tile from Creative Paradise is a 7 inch by 7 inch ceramic tile that functions as a textured kiln shelf. Place a prepared glass sheet on the primed tile and fire; as the glass softens, it picks up the peacock surface pattern from the tile below. Frit may also be fused directly on the tile to build up a patterned layer.
The tile measures 7 inches by 7 inches with a 10 inch diagonal. Like all ceramic kiln accessories, it is COE agnostic and reusable across many firings when the surface is prepared with a glass separator before each use. Creative Paradise provides two separate suggested firing schedules: one for texturing and fusing glass simultaneously, and one for texturing glass that has already been fused.
What does the Peacock Textured Fusing Tile do? It acts as a textured kiln shelf: place glass on the primed tile and fire, and the glass picks up the peacock surface pattern as it softens. Frit can also be fused directly on the tile surface to create a patterned piece.
Can I use this tile to texture glass that has already been fused? Yes. Creative Paradise includes a dedicated schedule for texturing pre-fused glass, which runs at lower peak temperatures than the simultaneous texture-and-fuse schedule.
What COE glass works with this tile? Any COE. The ceramic tile is COE agnostic, so the same tile works with COE96, COE90, or other fusible glass. Match your firing schedule to the glass you are using.
How do I prepare the tile before use? Apply a glass separator or kiln wash to the tile surface following the separator manufacturer's instructions, and let it cure completely before placing glass on it. A boron nitride spray such as ZYP works well for this.
Specifications
SKU: 157270
Manufacturer: Creative Paradise (CPI.GX16)
Use: ceramic texture fusing tile, acts as a textured kiln shelf to imprint a peacock pattern onto fused glass
Tile size: 7 inches L x 7 inches W
Diagonal: 10 inches
Material: ceramic texture tile, reusable
Glass: any COE (COE agnostic)
Working Notes
These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a schedule suited to your glass and kiln.
Prime the tile surface with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer , or a kiln wash such as Hotline Primo Primer , following the separator manufacturer's instructions, and let it cure completely before placing glass on it.
To texture during fusing, place the prepared glass sheet on the primed tile and fire using the simultaneous texturing-and-fusing schedule.
To texture pre-fused glass, place the pre-fused blank on the primed tile and fire using the texturing pre-fused schedule.
Frit may also be fused directly on the tile surface to create a patterned piece.
The tile is COE agnostic. Adjust the final anneal soak temperature to match your glass COE.
Let the kiln cool fully before removing the glass from the tile. Re-prime the tile surface as needed between firings.
Creative Paradise Suggested Firing Schedule
This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.
Full Fuse (COE96, two full layers):
Segment Rate Temp (F) Hold 1 275 1150 60 2 50 1300 20 3 350 1465 05 4 9999 950* 60
*Segment 4 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.
Helpful downloads: Texture Tiles Tutorial (PDF) · Peacock Textured Tile Tutorial (PDF)
Description updated: July 6, 2026
Spot an error or have feedback on this description? Report it here .