ARTGLASSSUPPLIES.COM
ArtGlassSupplies.com28 Daniel Plummer Rd, Unit 5
Goffstown, NH 03045, USA
(888) 213-8588 or(888) 213-8588 or
(518) 618-0812(518) 618-0812
The chart below shows the recommended electrical specifications for each Skutt kiln model, including voltage, amperage, wattage, wire size, breaker size, maximum temperature, and NEMA receptacle type.
If you are uncertain about your existing power, have it checked by an electrician. If you are installing a new kiln, have the electrician follow this guide.
| Model | Voltage | Amp | Watts | Wire Size* | Breaker Size | Max Temp | NEMA Receptacle |
| GM10F | 115 | 15 | 1725 | 12 | 20 | 1800 | 5-15 |
| GM814 | 240 | 27.8 | 6660 | 8 | 40 | 1800 | 6-50 |
| GM814 | 208 | 32 | 6656 | 8 | 40 | 1800 | 6-50 |
| GM1014 | 240 | 34 | 8140 | 6 | 50 | 1800 | 6-50 |
| GM1014 | 208 | 39.1 | 8140 | 6 | 50 | 1800 | 6-50 |
| GM1414 | 240 | 34.7 | 8320 | 6 | 50 | 1800 | 6-50 |
| GM1414 | 208 | 40 | 8320 | 6 | 50 | 1800 | 6-50 |
| GM1414 3ph | 240 | 20 | 8320 | 10 | 30 | 1800 | 15-50 |
| GM1414 3ph | 208 | 23.1 | 8320 | 10 | 30 | 1800 | 15-50 |
| GM818 | 240 | 27.8 | 6660 | 8 | 40 | 1800 | 6-50 |
| GM818 | 208 | 26.7 | 5550 | 8 | 40 | 1800 | 6-50 |
| GM1018 | 240 | 39.4 | 9460 | 6 | 50 | 1800 | 6-50 |
| GM1018 | 208 | 40 | 8320 | 6 | 50 | 1800 | 6-50 |
| GM1027 | 240 | 48 | 11520 | 6 | 60 | 1800 | 6-50 |
| GM1027 | 208 | 48 | 9980 | 6 | 60 | 1800 | 6-50 |
| GM1027 3ph | 240 | 29.3 | 11520 | 8 | 40 | 1800 | 15-50 |
| GM1027 3ph | 208 | 31.7 | 11000 | 8 | 40 | 1800 | 15-50 |
| GM1227 | 240 | 48 | 11520 | 6 | 60 | 1800 | 6-50 |
| GM1227 | 208 | 48 | 9980 | 6 | 60 | 1800 | 6-50 |
| GM1227 3ph | 240 | 29.3 | 11520 | 8 | 40 | 1800 | 15-50 |
| GM1227 3ph | 208 | 31.7 | 11000 | 8 | 40 | 1800 | 15-50 |
| GM22CS | 240 | 31 | 7450 | 8 | 40 | 1800 | 6-50 |
| GM22CS | 208 | 35.8 | 7450 | 6 | 50 | 1800 | 6-50 |
| GM22CS 3ph | 240 | 17.9 | 7450 | 10 | 30 | 1800 | 15-50 |
| GM22CS 3ph | 208 | 20.7 | 7450 | 10 | 30 | 1800 | 15-50 |
| All Skutt kilns are equipped with a type K thermocouple. *For each additional 50 feet use heavier wire, numerically two numbers lower. For example, instead of #10, use #8. If you anticipate installing any larger kiln in the future, use the heavier wire. |
|||||||
Do you love saving Money? We love helping you.
Sign up for our newsletter to find out about our weekly specials.
We will send you fusing tips and useful industry information too.
