Small Organic Bowl Slumping Mold

The Small Organic Bowl Slumping Mold from Creative Paradise shapes a pre-fused glass blank into a naturally contoured bowl in a single firing. The form measures 7 inches in diameter and 2.75 inches tall, and the finished bowl slumps to a depth of 1.5 inches, giving each piece a soft, rounded profile suited to decorative bowls, serving dishes, and display pieces.

Like all ceramic kiln forms, this mold is COE agnostic. Place a pre-made fused blank over the form, fire to slumping temperature, and gravity settles the glass into the bowl shape. The form is reusable across many firings when prepped and cared for properly.

What does the Small Organic Bowl mold make?
It slumps a pre-fused glass blank into an organically shaped bowl, roughly 7 inches across and 1.5 inches deep.

What size glass blank do I need?
The form is 7 inches in diameter. Cut or fuse a blank large enough to cover the form and allow the glass to drape into the 1.5 inch slump depth. Test your blank size and placement in a first run before committing a finished piece.

What COE glass works with this mold?
Any COE. Ceramic slumping forms are COE agnostic, so COE96, COE90, and other compatible fusible glass all work. Match your firing schedule and anneal soak temperature to the glass you use.

How do I prep the mold before slumping?
Coat the form surface with a kiln shelf primer such as a boron nitride spray or kiln wash, and let it dry completely before placing the glass blank. Re-coat between firings as needed.

Specifications

• SKU: 162885
• Manufacturer: Creative Paradise (CPI.GM211)
• Makes: 1 organic bowl
• Mold size: 7 inches diameter x 2.75 inches tall
• Slump depth: 1.5 inches
• Material: ceramic kiln slumping mold, reusable
• Glass: any COE (COE agnostic)

Working Notes

These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a slumping schedule suited to your glass and kiln.

• Prime the mold surface with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer, or a kiln wash such as Hotline Primo Primer, and let it dry completely before placing the glass so it does not stick.
• Place a pre-fused glass blank over the form. The blank should be sized to cover the 7 inch form and have enough material to settle into the 1.5 inch slump depth.
• The mold is COE agnostic. Use a slumping schedule matched to your glass, adjusting the final anneal soak for your COE.
• Let the kiln cool fully before removing the slumped bowl. Re-coat the mold with primer between firings as needed.
• The Slide Hi Temp brand separator is not recommended with these molds.

Creative Paradise Suggested Firing Schedule

This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.

Slump (COE96):

*Segment 3 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.

Description updated: July 6, 2026

Spot an error or have feedback on this description? Report it here.