Snow Flake Texture Fusing Tile

The Snow Flake Texture Fusing Tile from Creative Paradise is a ceramic tile measuring 13 inches by 7 inches, with a diagonal of 14.75 inches, impressed with a snowflake relief pattern across its surface. To use it, place a prepared glass sheet or fused blank on the textured face and fire to a full fuse so the glass softens and flows into the snowflake pattern.

The tile is ceramic and COE agnostic, so it works with COE96, COE90, or other fusible glass. The Creative Paradise firing schedule is written for a double layer of COE96 glass with frit. Like all ceramic texture tiles, it is reusable across many firings when prepped and cared for properly.

What does the Snow Flake Texture Fusing Tile make?
It impresses a snowflake pattern into a fused glass sheet. Place your glass on the textured surface, fire to a full fuse, and the finished piece carries the snowflake texture where it contacted the tile.

What size glass should I use?
Cut your glass sheet to fit the 13 inch by 7 inch tile surface. The diagonal across the tile measures 14.75 inches.

What COE glass works with this tile?
Any COE. Ceramic texture tiles are COE agnostic, so the same tile works with COE96, COE90, or other fusible glass. Match your firing schedule to the glass you are using.

How do I prep the tile before firing?
Coat the textured surface with a kiln shelf primer such as a boron nitride spray (for example ZYP) or a kiln wash such as Hotline Primo Primer, and let it dry completely before placing your glass so the glass does not stick to the tile.

Specifications

• SKU: 152538
• Manufacturer: Creative Paradise (CPI.DT27)
• Tile size: 13 inches L x 7 inches W
• Diagonal: 14.75 inches
• Material: ceramic texture tile, reusable
• Glass: any COE (COE agnostic)

Working Notes

These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a firing schedule suited to your glass and kiln.

• Prime the textured surface with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer, or a kiln wash, and let it dry completely before placing your glass so the glass does not stick.
• Place a glass sheet or fused blank directly on the textured face of the tile. The Creative Paradise schedule is written for a double layer of COE96 glass with frit.
• The tile is COE agnostic. Use a full fuse schedule matched to your glass, adjusting the final anneal soak for your COE.
• Let the kiln cool fully before removing the fused piece. Re coat the tile surface with primer as needed between firings.
• The Slide Hi Temp brand separator is not recommended with these molds.

Creative Paradise Suggested Firing Schedule

This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.

Full Fuse (COE96): for a double layer of COE96 glass with frit.

*Segment 4 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.

Helpful downloads: Texture Tiles Tutorial (PDF) · Snowflake Embossed Ornaments Tutorial (PDF)

Description updated: July 6, 2026

Spot an error or have feedback on this description? Report it here.