Stand Up Slumping Mold

The Stand Up Slumping Mold from Creative Paradise is a kiln slumping form that shapes a pre-made glass blank into a piece that stands upright on its own. The mold footprint is 8 inches by 6 inches, with a diagonal of 10.25 inches, a size suited to single-blank slumping projects and accessible to fusers at any level.

Like all ceramic slumping molds, this one is COE agnostic. Place a pre-fused or pre-cut glass blank over the form, fire to the slumping temperature, and gravity draws the glass down into the shape. The mold is reusable across many firings when prepped and cared for properly.

What does the Stand Up Slumping Mold make?
It slumps a glass blank into a form that stands upright on its own when finished. The mold measures 8 inches by 6 inches and suits decorative pieces, sculptural objects, and functional forms.

What COE glass can I use with this mold?
Any COE. Ceramic slumping molds are COE agnostic, so the same mold works with COE96, COE90, or other fusible glass. Match your firing schedule to the glass you are using.

How do I slump glass in this mold?
Place a pre-fused or pre-cut glass blank over the primed form, load it into your kiln, and heat to the slumping temperature. Gravity softens and settles the glass into the stand-up shape. Follow a schedule suited to your glass and kiln.

How do I prep the mold before slumping?
Coat the mold surface with a boron nitride spray or kiln wash and let it dry completely before placing glass on it. Re coat as needed between firings so the glass releases cleanly.

Specifications

• SKU: 156216
• Manufacturer: Creative Paradise (CPI.GM35)
• Mold type: kiln slumping form
• Mold size: 8 inches L x 6 inches W
• Diagonal: 10.25 inches
• Material: ceramic kiln slumping mold, reusable
• Glass: any COE (COE agnostic)

Working Notes

These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a slumping schedule suited to your glass and kiln.

• Prime the mold surface with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer, or a kiln wash such as Hotline Primo Primer, and let it dry completely before placing glass on it so the glass does not stick.
• Place a pre-fused or pre-cut glass blank over the form. Size the blank to fit within the 8 by 6 inch mold footprint.
• The mold is COE agnostic. Use a slumping schedule matched to your glass, adjusting the anneal soak temperature for your COE.
• Let the kiln cool fully before removing the slumped piece. Re coat the mold with primer as needed between firings.
• The Slide Hi Temp brand separator is not recommended with these molds.

Creative Paradise Suggested Firing Schedule

This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.

Slump (COE96):

*Segment 2 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.

Helpful downloads: Creepy Crawlers Tutorial (PDF)

Description updated: July 6, 2026

Spot an error or have feedback on this description? Report it here.