This sheet is printed with a full set of bold stencil-cut uppercase letters in solid black. The A-to-Z alphabet fills the sheet in dense rows, with common letters such as A, B, C, and S repeated several times, and the bottom two rows are given over to a generous supply of ampersand characters. Each letter carries the open-bridge cuts and heavy weight of classic stencil lettering, reading clearly against clear or light glass.
These water-slide decals are applied to clean pre-fired glass and fired to leave a permanent typographic accent. Because the decal fires onto the surface rather than bonding as a compatible layer, this sheet works with any COE glass. Cut out the letters you need, soak briefly until each loosens from its backing, slide into position, smooth out water and air, and let the piece dry completely before firing.
What glass can I use?
Any COE glass works, because the decal fires onto the surface of pre-fired glass rather than bonding as a compatible layer. Clean the glass thoroughly before applying for proper adhesion.
How do I apply a letter?
Cut out the character you need, soak it briefly until it loosens from the backing, slide it into position on your pre-fired glass, smooth out water and air with a soft tool, and let the piece dry completely before loading the kiln.
Can I combine letters into words?
Yes. The sheet provides multiple copies of common letters plus a large supply of ampersands, so you can position characters side by side to build words, names, or short phrases before the decals dry.
What characters are included?
The complete uppercase alphabet A to Z in bold stencil lettering, with high-frequency letters repeated, plus rows of ampersand characters for names, labeling, or accents.
Specifications
- SKU: 161255
- Contents: full uppercase stencil alphabet with multiples of common letters, plus rows of ampersands
- Finish: solid black
- Format: single printed water-slide decal sheet
- Sheet size: 5.25 x 4 inches
- Compatible with any COE glass
Working Notes
Clean your pre-fired glass well before applying. Soak, slide, smooth, and let the piece dry fully before firing. Keep a lint-free cloth nearby to blot excess water without disturbing the decal. Every kiln fires differently, so test a small piece first and anneal for the thickness of your glass.
Suggested Firing Schedule (the manufacturer's recommendation, a starting point only): This solid black sheet fires to a peak of 1240 to 1370 degrees F, held about 10 minutes and kept toward the lower end to preserve density. Ventilate the kiln well up to 1000 degrees and fire slowly below 500 degrees. 50 DPH to 185 degrees, HOLD/SOAK 20 min. 150 DPH to 300 degrees, HOLD/SOAK 15 min. 250 DPH to 500 degrees, HOLD/SOAK 15 min. 600 DPH to 1000 degrees, HOLD/SOAK 10 min. 1000 DPH to 1240 to 1370 degrees, HOLD/SOAK 10 min. Anneal for the thickness of your glass. Results vary by kiln, so test a small piece first.
Description updated: July 6, 2026
Spot an error or have feedback on this description? Report it here.
