Twisted Cane Murrini Stick Red and Yellow COE96

This COE96 murrini cane stick works a warm palette of red, orange, amber-yellow, and deep maroon into a single glass rod you slice as needed for your fused glass projects. This listing is for a single stick approximately 9 inches long. Cut cross-sections reveal a ringed design: a dark maroon or deep red center ringed in amber-yellow and orange, wrapped in a warm red to pink outer body. The twist along the cane shifts the inner shapes from round to softly squared or organic outlines, so slices vary in character while staying inside the same warm color family.

Murrini are small cross-section slices of patterned glass cane, with the same design appearing at every cut. Place individual slices on the surface of your fused glass piece before firing, where they fuse in as decorative accents suited to jewelry, pendants, plates, dishes, suncatchers, and ornaments.

What does the pattern look like when I slice this cane?
Each slice shows a dark maroon or deep red center surrounded by rings of amber-yellow and orange, all wrapped in a warm red to pink outer band. The twist in the cane gives the inner rings a slightly varied, organic quality from slice to slice, with well-defined color transitions throughout.

What COE glass must I use with these slices?
This is COE96 glass. Use it only with glass of the same COE. Mismatched expansion rates cause stress and cracking as the materials heat and cool at different speeds, so keep every component in your project at the same COE.

How many slices can I get from one stick?
Slice count depends on how thin you cut each piece. Cutting thin cross-sections from a single 9 inch stick yields a generous number of individual murrini, enough for multiple small projects.

How do I use these slices in a fused glass project?
Place individual slices on the surface of your prepared glass piece before firing. The slices fuse in as decorative accents rather than serving as a base layer. A full fuse or a tack fuse will each produce a different result, described in the Working Notes below.

Specifications

• SKU: 162855
• COE: COE96
• Sold as: a single cane stick
• Stick length: approximately 9 inches
• Pattern: ringed design with a dark maroon center, amber-yellow and orange rings, and a warm red outer body

Working Notes

A full fuse fires the murrini slices completely flat and flush into the glass surface, softening the color boundaries slightly and producing a smooth, integrated look. A tack fuse stops short of a full melt and preserves more of the raised, dimensional profile of each slice, keeping the ring detail more visible and the edges more defined.

Results vary with different glass types, kiln models, and firing schedules. Always test a small sample piece before committing a full project to the kiln, and match your firing approach to the specific glass and equipment you are using.

Description updated: July 6, 2026

Spot an error or have feedback on this description? Report it here.