Each slice reveals a bright yellow heart centered on a deep navy blue field, some leaning toward a yellow green tint. The high contrast keeps the motif sharp and legible even at small sizes, and the cleanly centered heart makes slices easy to place with intention.
Murrini, also called millefiori, are small cross-section slices of patterned glass cane, and the design runs the full length of the cane, so every slice shows the same heart. These COE90 slices are placed on the surface of a fused glass project and fired in as accents on jewelry, pendants, dishes, plates, and suncatchers. Sold as a bag of assorted slices; slice sizes and counts vary from pack to pack.
What does the pattern on these murrini look like?
A bright yellow heart, some with a slight yellow green cast, on a deep navy blue background. The heart is opaque with clean, defined edges against the dark field.
What glass must I use with these murrini?
These are COE90 murrini. Fuse them only with glass of the same COE, and confirm that your base glass and every other element in the project share that rating. Mismatched expansion rates can cause cracking during firing and cooling.
How many slices come in a pack?
Sizes and counts vary from pack to pack, so expect a natural mix of diameters rather than a fixed number.
How do I use these in a fused glass project?
Place individual slices on the surface of your fused glass piece before firing. They work as accents on pendants, earring blanks, small dishes, plates, suncatchers, and ornaments. See the Working Notes below for guidance on full fuse versus tack fuse.
Specifications
- SKU: 13968
- COE: COE90
- Pack: bag of assorted slices; sizes and counts vary
- Pattern/motif: yellow heart, some leaning yellow green, on a navy blue background
- Net weight: about 1/2 oz per bag
Working Notes
A full fuse melts the slices flat into the surrounding glass for a smooth, flush surface and slightly softens the heart outline. A tack fuse stops short of that, preserving each slice's raised profile and keeping the heart sharper. The right choice depends on the look you want.
Before committing a batch to a finished piece, fire a small test with one or two slices on a scrap of your base glass. Temperatures and ramp rates vary by kiln, glass, and thickness, so match your schedule to your specific materials and equipment.
Description updated: September 4, 2026
Spot an error or have feedback on this description? Report it here.
