Fairy on the Moon Textured Fusing Tile

The Fairy on the Moon Textured Fusing Tile from Creative Paradise is a round ceramic texture tile, 11.25 inches in diameter, with a fairy on the moon design pressed into its surface. To use it, a glass blank is placed on the prepared tile and fired to full fuse temperature, so the glass softens and settles into the texture, picking up the fairy on the moon design on the underside of the finished piece.

Creative Paradise suggests using a double layer of glass with this tile. Like all ceramic molds, it is COE agnostic, so the same tile works with COE96, COE90, or other fusible glass. The tile is reusable across many firings when prepped and cared for properly.

What does the Fairy on the Moon Textured Fusing Tile make?
It transfers a fairy on the moon relief design onto the underside of a fused glass piece. Place a glass blank on the prepared tile and full fuse it so the glass settles into the texture and picks up the design.

What COE glass can I use with this tile?
Any COE. Ceramic molds are COE agnostic, so the same tile works with COE96, COE90, or other fusible glass. Match your firing schedule to the glass you are using.

How much glass do I use?
Creative Paradise suggests a double layer of glass for the full fuse schedule. Cut your blank to fit the 11.25 inch tile, adjusting the size to suit your design.

How do I prep the tile before fusing?
Coat the tile surface with a boron nitride spray such as ZYP, or a kiln wash such as Hotline Primo Primer, and let it dry completely before placing your glass. Re coat as needed between firings.

Specifications

• SKU: 175280
• Manufacturer: Creative Paradise (CPI.DT44)
• Type: Textured fusing tile
• Design: Fairy on the moon
• Mold size: 11.25 inches diameter
• Material: ceramic kiln mold, reusable
• Glass: any COE (COE agnostic)

Working Notes

These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a fusing schedule suited to your glass and kiln.

• Prime the tile surface with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer, or a kiln wash, and let it dry completely before placing your glass so the glass does not stick.
• Place a double layer of glass on the prepared tile surface. The glass softens and settles into the tile's design during the fuse, picking up the fairy on the moon pattern on the underside of the piece.
• The tile is COE agnostic. Use a full fuse schedule matched to your glass, adjusting the final anneal soak for your COE.
• Let the kiln cool fully before removing the fused piece. Re coat the tile with primer as needed between firings.
• The Slide Hi Temp brand separator is not recommended with these molds.

Creative Paradise Suggested Firing Schedule

This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.

Full Fuse (COE96, double layer):

*Segment 4 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.

Helpful downloads: Fairy on the Moon Casting Tutorial (PDF)

Description updated: July 6, 2026

Spot an error or have feedback on this description? Report it here.