Round Snow Flake Texture Fusing Tile

The Round Snowflake Texture Fusing Tile from Creative Paradise is a 12 inch diameter ceramic tile with a raised snowflake pattern. Lay a sheet of fusible glass on the primed tile and fire it so the glass softens and takes on the snowflake texture across its surface. The result is a round fused glass panel carrying the snowflake design, ready for display or further finishing.

The tile measures 12 inches in diameter. Like all ceramic kiln tiles and molds, it is COE agnostic and works with COE96, COE90, or other fusible glass. Creative Paradise recommends a double layer of glass with frit for the suggested firing schedule. The tile is reusable across many firings when primed and cared for properly.

What does the Round Snowflake Texture Fusing Tile make?
It imprints a snowflake pattern on a round piece of fusible glass up to 12 inches in diameter, producing one textured glass panel per firing.

What COE glass can I use?
Any COE. Ceramic texture tiles are COE agnostic, so the same tile works with COE96, COE90, or other fusible glass. Match your firing schedule to the glass you are using.

How do I use this tile?
Prime the tile surface with a boron nitride spray or kiln wash and let it dry completely. Place your glass directly on the tile and fire so it softens and picks up the snowflake texture. Creative Paradise suggests a double layer with frit for a full fuse result.

How many pieces does one firing produce?
One. Each firing yields one round textured glass panel, up to 12 inches in diameter.

Specifications

• SKU: 152539
• Manufacturer: Creative Paradise (CPI.DT28)
• Makes: 1 round textured glass panel per firing
• Mold size: 12 inches diameter
• Material: ceramic texture tile, reusable
• Glass: any COE (COE agnostic)

Working Notes

These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a firing schedule suited to your glass and kiln.

• Prime the tile surface with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer, or a kiln wash such as Hotline Primo Primer, and let it dry completely before placing glass on the tile so the glass does not stick.
• Lay your glass directly on the primed tile. Creative Paradise suggests a double layer of glass with frit for a full fuse result.
• The tile is COE agnostic. Use a full fuse schedule matched to your glass, adjusting the final anneal soak for your COE.
• Let the kiln cool fully before removing the textured glass. Re coat the tile with primer as needed between firings.
• The Slide Hi Temp brand separator is not recommended with these molds.

Creative Paradise Suggested Firing Schedule

This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.

Full Fuse (COE96), double layer with frit:

*Segment 4 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.

Helpful downloads: Texture Tiles Tutorial (PDF) · Snowflake Textured Tile Tutorial (PDF)

Description updated: July 6, 2026

Spot an error or have feedback on this description? Report it here.