Wine Rack Slumping Mold

The Wine Rack Slumping Mold from Creative Paradise shapes a pre-made glass sheet or fused blank into a wine rack form in a single firing. The mold measures 15 inches long by 6.5 inches wide, with a diagonal of 16 inches, giving you a substantial footprint for a functional glass piece.

Like all ceramic slumping molds, this one is COE agnostic. Place a pre-cut or pre-fused glass sheet over the form, fire to the slump temperature, and gravity draws the glass down into the wine rack shape. The manufacturer provides a suggested slump schedule based on a double layer of COE96 glass.

What does the Wine Rack Slumping Mold make?
It shapes a glass wine rack from a pre-made sheet or fused blank placed over the form. The glass softens and conforms to the mold during firing, producing a finished wine rack piece.

What COE glass can I use with this mold?
Any COE. Ceramic slumping molds are COE agnostic, so the same mold works with COE96, COE90, or other fusible glass. Match your firing schedule and anneal soak temperature to the glass you are using.

How do I prepare the glass for slumping?
Cut or fuse a glass blank sized to cover the mold. The manufacturer's suggested schedule is written for a double layer of COE96 glass, so adjust your glass thickness or layers as needed for your design.

How do I prep the mold before slumping?
Coat the mold surface with a kiln shelf primer such as a boron nitride spray (for example ZYP) or a kiln wash such as Hotline Primo Primer, and let it dry completely before placing the glass so it releases cleanly after firing.

Specifications

• SKU: 159311
• Manufacturer: Creative Paradise (CPI.GM71)
• Mold type: ceramic slumping mold, reusable
• Mold size: 15 inches L x 6.5 inches W
• Diagonal: 16 inches
• Glass: any COE (COE agnostic)

Working Notes

These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a slumping schedule suited to your glass and kiln.

• Prime the mold surface with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer, or a kiln wash, and let it dry completely before placing the glass so it releases cleanly after firing.
• Place a pre-cut or pre-fused glass sheet over the form. The suggested schedule is based on a double layer of COE96 glass; adjust for a single layer or different glass thickness as needed.
• The mold is COE agnostic. Use a slumping schedule matched to your glass, and adjust the anneal soak temperature for your COE.
• Let the kiln cool fully before removing the slumped piece. Re-coat the mold with primer as needed between firings.
• The Slide Hi Temp brand separator is not recommended with these molds.

Creative Paradise Suggested Firing Schedule

This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.

Slump (COE96, double layer):

*Segment 3 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.

Helpful downloads: Wavy Seashell Hand Towel Rack Tutorial (PDF)

Description updated: July 6, 2026

Spot an error or have feedback on this description? Report it here.