Round Poinsettia Texture Fusing Tile

The Round Poinsettia Texture Fusing Tile from Creative Paradise is an 11 inch diameter ceramic tile that imprints a raised poinsettia pattern into your glass during firing. Place a pre-cut sheet of fusible glass on the tile, fire it to a full fuse, and the softened glass picks up the relief of the poinsettia design from the textured surface. The finished piece is ready for use in a fused panel, light catcher, or holiday project.

The tile measures 11 inches in diameter. Creative Paradise suggests working with a double layer of fusible glass and adding frit for color interest across the design. Like all ceramic kiln tiles, it is COE agnostic and reusable across many firings when prepped and cared for properly.

What does the Round Poinsettia Texture Fusing Tile do?
It imprints a poinsettia relief pattern onto a sheet of fusible glass during firing. Place glass on the tile, fire to a full fuse, and the softened glass takes on the textured poinsettia design from the tile surface.

What glass do I place on it?
Creative Paradise suggests a double layer of fusible glass, with frit added on top or between layers for color variation across the design. Cut or arrange your glass to cover the 11 inch round tile area as needed for your project.

What COE glass can I use?
Any COE. Ceramic texture tiles are COE agnostic, so the same tile works with COE96, COE90, or other fusible glass. Match your firing schedule to the glass you are using.

How do I prep the tile before firing?
Coat the surface with a kiln primer such as a boron nitride spray (for example ZYP) or a kiln wash such as Hotline Primo Primer, and let it dry completely before placing glass so the piece releases cleanly after firing.

Specifications

• SKU: 156925
• Manufacturer: Creative Paradise (CPI.DT21)
• Type: Round texture fusing tile
• Tile size: 11 inch diameter
• Material: ceramic kiln tile, reusable
• Glass: any COE (COE agnostic)

Working Notes

These are guidelines, not guarantees. Every kiln fires a little differently, so test a small run first when the result matters and follow a firing schedule suited to your glass and kiln.

• Prime the tile surface with a boron nitride mold primer such as ZYP Boron Nitride Mold Primer, or a kiln wash, and let it dry completely before placing glass so the piece releases cleanly after firing.
• Place a double layer of fusible glass on the tile. Add frit on top or between the layers for color interest across the poinsettia design. The suggested firing schedule below is based on this double layer with frit configuration.
• The tile is COE agnostic. Use a full fuse schedule matched to your glass, adjusting the final anneal soak for your COE.
• Let the kiln cool fully before removing the fired piece. Re-coat the tile with primer as needed between firings.
• The Slide Hi Temp brand separator is not recommended with these tiles.

Creative Paradise Suggested Firing Schedule

This is a suggested COE96 starting schedule, not a guarantee. Every kiln fires differently. Test a small run and adjust the schedule for your glass and kiln.

Full Fuse (COE96): for a double layer of glass with frit.

*Segment 4 is the anneal soak at 950 F for COE96. If using COE90, adjust this temperature to 900 F.

Helpful downloads: Textured Tile Tutorial (PDF)

Description updated: July 6, 2026

Spot an error or have feedback on this description? Report it here.